外包兼职做图的网站百度竞价ocpc

思路: 模拟

class Solution {public int minOperations(int[] nums, int k) {return (int)Arrays.stream(nums).filter(x -> x < k).count();}
}

思路: 模拟

按题意模拟即可，需要注意int溢出问题就行。

class Solution {public int minOperations(int[] nums, int k) {PriorityQueue<Long> pq = new PriorityQueue<>();for (long num : nums) {pq.offer(num);}int ans = 0;while (pq.peek() < k) {long x = pq.poll(), y = pq.poll();pq.offer(Math.min(x, y) * 2 + Math.max(x, y));ans++;}return ans;}
}

思路: 枚举 + dfs/bfs + 组合数学

因为树的点数n($n\le 1000$), 所以枚举点，从该点进行dfs/bfs，然后对每个分支进行组合统计。

组合统计的核心

$$点u出发的各个分支满足整除的数，组合序列为c_0,c_1,c_2,c_3,...,c_m$$

$$其s=\sum _{i=0}^{i=m}{c}_i$$

$$结果为res[u]=(\sum _{i=0}^{i=m}{c}_i\ast (s-c_i))/2$$

这样时间复杂度为 $O(n^2)$, 是可以接受的。

class Solution {List<int[]> []g;int signalSpeed;// fa是阻断点int bfs(int u, int w, int fa) {int res = 0;boolean[] vis = new boolean[g.length];Deque<int[]> deq = new ArrayDeque<>();vis[u] = true;deq.offer(new int[] {u, w});if (w % signalSpeed == 0) {res ++;}while (!deq.isEmpty()) {int[] cur = deq.poll();int p = cur[0];int v = cur[1];for (int[] e: g[p]) {if (e[0] == fa) continue;if (vis[e[0]]) continue;if ((v + e[1]) % signalSpeed == 0) res++;deq.offer(new int[] {e[0], v + e[1]});vis[e[0]] = true;}}return res;}public int[] countPairsOfConnectableServers(int[][] edges, int signalSpeed) {int n = edges.length + 1;g = new List[n];Arrays.setAll(g, x->new ArrayList<>());this.signalSpeed = signalSpeed;for (int[] e: edges) {g[e[0]].add(new int[] {e[1], e[2]});g[e[1]].add(new int[] {e[0], e[2]});}int[] res = new int[n];for (int i = 0; i < n; i++) {int sum = 0;List<Integer> lists = new ArrayList<>();for (int[] e: g[i]) {int tmp = bfs(e[0], e[1], i);lists.add(tmp);sum += tmp;}int tot = 0;for (int j = 0; j < lists.size(); j++) {tot += lists.get(j) * (sum - lists.get(j));}res[i] = tot / 2;}return res;}}

如果该题把n变成$n\le 10^5$, 那该如何解呢？

$$感觉换根DP可行，但是需要限制signalSpeed范围在100之内,这样可控制在O(10^7)$$

如果signalSpeed很大，感觉没辙啊。

思路: 树形DP

树形DP的解法更加具有通用性，所以比赛就沿着这个思路写。

$$如果操作不是异或，那这个思路就更有意义$$

对于任意点u, 其具备两个状态。

$$dp[u][0],dp[u][1],表示参与和没有参与异或下的以u为根节点的子树最大和。$$

那么其转移方程，其体现在当前节点u和其子节点集合S($v\in u的子节点$)的迭代递推转移。

class Solution {int k;int[] nums;List<Integer>[]g;long[][] dp;void dfs(int u, int fa) {// 该节点没参与， 该节点参与了long r0 = nums[u], r1 = Long.MIN_VALUE / 10;for (int v: g[u]) {if (v == fa) continue;dfs(v, u);long uRev0 = r0 + (nums[u]^k) - nums[u];long uRev1 = r1 - (nums[u]^k) + nums[u];long vRev0 = dp[v][0] + (nums[v]^k) - nums[v];long vRev1 = dp[v][1] - (nums[v]^k) + nums[v];long x0 = Math.max(r0 + Math.max(dp[v][0], dp[v][1]),Math.max(uRev1 + vRev1, uRev1 + vRev0));long x1 = Math.max(r1 + Math.max(dp[v][1], dp[v][0]),Math.max(uRev0 + vRev0, uRev0 + vRev1));r0 = x0;r1 = x1;}dp[u][0] = r0;dp[u][1] = r1;}public long maximumValueSum(int[] nums, int k, int[][] edges) {int n = nums.length;this.g = new List[n];this.nums = nums;this.k = k;this.dp = new long[n][2];Arrays.setAll(g, x -> new ArrayList<>());for (int[] e: edges) {g[e[0]].add(e[1]);g[e[1]].add(e[0]);}dfs(0, -1);return Math.max(dp[0][0], dp[0][1]);}
}

class Solution:def maximumValueSum(self, nums: List[int], k: int, edges: List[List[int]]) -> int:n = len(nums)g = [[] for _ in range(n)]for e in edges:g[e[0]].append(e[1])g[e[1]].append(e[0])dp = [[0] * 2 for _ in range(n)]def dfs(u, fa):r0, r1 = nums[u], -0x3f3f3f3f3ffor v in g[u]:if v == fa:continuedfs(v, u)uRev0 = r0 + (nums[u]^k) - nums[u];uRev1 = r1 - (nums[u]^k) + nums[u];vRev0 = dp[v][0] + (nums[v]^k) - nums[v];vRev1 = dp[v][1] - (nums[v]^k) + nums[v];t0 = max(r0 + max(dp[v][0], dp[v][1]), max(uRev1 + vRev0, uRev1 + vRev1))t1 = max(r1 + max(dp[v][0], dp[v][1]), max(uRev0 + vRev0, uRev0 + vRev1))r0, r1 = t0, t1dp[u][0], dp[u][1] = r0, r1dfs(0, -1)return max(dp[0][0], dp[0][1])

由于异或的特点，所以这题可以抛弃边的束缚。

$$任意两点u,v，可以简单构造一条路径，只有端点(u,v)出现1次，其他点都出现2次$$

异或涉及边的两点，因此异或的点必然是偶数个，这是唯一的限制.

class Solution {public long maximumValueSum(int[] nums, int k, int[][] edges) {long sum = 0;PriorityQueue<Long> pq = new PriorityQueue<>(Comparator.comparing(x -> -x));for (int v: nums) {pq.offer((long)(v ^ k) - v);sum += v;}while (pq.size() >= 2) {long t1 = pq.poll();long t2 = pq.poll();if (t1 + t2 > 0) {sum += t1 + t2;} else {break;}}return sum;}
}

class Solution:def maximumValueSum(self, nums: List[int], k: int, edges: List[List[int]]) -> int:s = sum(nums)arr = [(v ^ k) - v for v in nums]arr.sort(key=lambda x: -x)n = len(nums)for i in range(0, n, 2):if i + 1 < n and arr[i] + arr[i + 1] > 0:s += arr[i] + arr[i + 1]return s